Introduction to Gypsum granule pneumatic conveying system, Material conveying specifications, model parameters

Gypsum granule pneumatic conveying systemis a method of conveying materials through pipelines by using air flow with a certain speed.，Simple structure and reliable operation.，the main structure includes delivery system, control system, Conveying pipeline system, Bunker system, dust pelletizing system and so on，the principle is simple.Using aerodynamic force, compressed air or other gases form airflow in the pipeline, and the material particles are suspended in the airflow or transported along the pipeline in groups.，The materials concentrated from several points can be sent to one place or sent to scattered points from one place.、Can realize the transportation of materials in a closed pipeline.，Not affected by environment, climate and other conditions, fully sealed and pollution-free transportation.、The conveying system is closed, which can prevent the materials from being affected with damp, soiled and mixed with other sundries in the conveying process, and ensure the conveying quality of the materials.，meet the needs of material transportation、In the process of conveying, various technological operations can be carried out at the same time, such as be broken.、Single-point unloading and multi-point unloading can be realized, and remote operation can be realized.，the product looks beautiful.。The following is to introduce the Gypsum granule pneumatic conveying system:

1、Brief introduction of Gypsum granule pneumatic conveying system

Gypsum granule pneumatic conveying systemis a material conveying technology for conveying granular particles in a pipeline by means of compressed air flow.，it has been widely used in medicine, environmental protection, cast, build a ship, heat-engine plant and other industries。

Gypsum granule pneumatic conveying system

2、Structural advantages of Gypsum granule pneumatic conveying system

The Gypsum granule pneumatic conveying system has the following structure

1. control system

The control system is the "brain" of the Gypsum granule pneumatic conveying system system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

2. Air source device

The air source device is the power core of the Gypsum granule pneumatic conveying system system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

3. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

4. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

5. Air source device

The air source device is the power core of the Gypsum granule pneumatic conveying system system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

Gypsum granule pneumatic conveying system

3、Gypsum granule pneumatic conveying system function

Gypsum granule pneumatic conveying systemit has the functions of Closed conveying, material handling, Physical processing assistance, Automatic control and Closed conveying，Mainly used forLong distance transportation,Environmental protection and cleaner production,Heating, cooling and drying,cut down on energy consumption andReduce pollution，widely used inmetallurgy,building material,power,chemical plant,chemical industry and other industries，is based on hyde is carefully developed by hyde powder combined with advanced technology。

Gypsum granule pneumatic conveying system

4、Introduction of advantages of Gypsum granule pneumatic conveying system

Gypsum granule pneumatic conveying systems have the following advantages.

1. High degree of automation

Modern Gypsum granule pneumatic conveying system systems are usually equipped with automatic control equipment, such as PLC control system, sensors, actuators, etc., which can realize remote monitoring and automatic adjustment. This highly automated transportation mode reduces labor costs and improves production efficiency and management convenience.

2. Easy to maintain

The Gypsum granule pneumatic conveying system system does not need a lot of mechanical equipment, so its maintenance cost is relatively small. In addition, in the process of use, it is only necessary to clean the pipeline regularly and keep it airtight.

3. Generality

For materials with unstable chemical properties, the Gypsum granule pneumatic conveying system system can use inert gas for transportation to ensure the stability of the materials during transportation.

4. The quality of convey materials is ensure.

In the process of conveying, the Gypsum granule pneumatic conveying system can prevent the materials from getting wet, soiled or mixed with other impurities, thus ensuring the quality of the conveyed materials.

5. energy saving and environmental protection

The Gypsum granule pneumatic conveying system system is completely closed, which reduces the flying of dust and meets the requirements of environmental protection. This is especially important for those industries that require high environmental protection.

Gypsum granule pneumatic conveying system

5、Structural characteristics of Gypsum granule pneumatic conveying system

The Gypsum granule pneumatic conveying system structure is introduced as follows:

1. control system

The control system is the "brain" of the Gypsum granule pneumatic conveying system system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

2. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Gypsum granule pneumatic conveying system system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

3. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

4. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

5. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

Gypsum granule pneumatic conveying system

Gypsum granule pneumatic conveying systemwidely used in machine building, logistics, plastic, building materials, transportation and other fields，Air flow is generated by compressed air or other gases, and a certain air flow speed and pressure are formed in the pipeline. These air currents suspend the material particles in it, or transport the materials along the pipeline in a group state. In this process, the material particles are in a liquid state under the action of airflow, so as to realize the continuous and stable transportation of materials.，features include High system reliability, Flexible layout, Economic and environmental protection, Easy maintenance and High reliability。