What is a Unloading and discharging pneumatic conveying system? How much is the price of the Material conveying?

Unloading and discharging pneumatic conveying systemis a technology that uses the energy of airflow to transport granular materials along the direction of airflow in a closed pipeline.，It has the functions of Bulk material transportation, material handling, Heating, cooling and drying, Mixing and classification and Long-distance and multipoint transportation，the product looks atmospheric.，is a Unloading and discharging pneumatic conveying system，is a kind of Unloading and discharging pneumatic conveying system manufactured by hyde powder。

1、Brief introduction of Unloading and discharging pneumatic conveying system

Unloading and discharging pneumatic conveying systemis a kind of material conveying equipment which uses the energy of airflow to convey granular or powdery materials along the airflow direction in a closed pipeline.，the advantage is The conveying system is closed.，The material is not affected by the outside world and will not be wet or deteriorated. Not easy to leak, causing dust flying, fully sealed and pollution-free transportation.、The pipeline layout is flexible, and it can be arranged according to the specific terrain.、Fully enclosed transportation system, materials are transported in closed pipes.，Effectively prevent materials from absorbing moisture, fouling or mixing with other impurities during transportation, and fully seal and transport without pollution.、The materials concentrated from several points can be sent to one place or sent to scattered points from one place.、In the process of conveying, various technological operations can be carried out at the same time, such as grade.，support customization。

Unloading and discharging pneumatic conveying system

2、Unloading and discharging pneumatic conveying system advantage

The advantages of Unloading and discharging pneumatic conveying system are as follows:

1. Small floor space

Compared with other transportation modes, the Unloading and discharging pneumatic conveying system system occupies a small area and can make full use of space resources, especially suitable for use in factories or workshops with limited space.

2. Low maintenance cost

Although the initial investment of Unloading and discharging pneumatic conveying system system may be high, its maintenance cost is relatively low. Because the equipment has simple structure and few moving parts, it is convenient to maintain and has low cost. In addition, after long-term operation, its efficient and stable conveying performance will also bring remarkable economic benefits to enterprises.

3. Structural construction

The structure is relatively simple, mainly composed of conveying pipeline, air source equipment, control system, etc., and the maintenance is convenient.

4. Multi-point to multi-point transportation

The Unloading and discharging pneumatic conveying system system can realize multi-point to multi-point transportation, meet the needs of different production lines and improve the production flexibility.

5. Wide application range

The Unloading and discharging pneumatic conveying system system can transport a variety of materials, including powder, granular, fibrous and small block materials. In addition, for materials with unstable chemical properties, inert gas can also be used for transportation to ensure the stability and safety of materials during transportation. This wide adaptability makes Unloading and discharging pneumatic conveying systems widely used in many industries.

Unloading and discharging pneumatic conveying system

3、Unloading and discharging pneumatic conveying system structure composition

The Unloading and discharging pneumatic conveying system has the following structure

1. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

2. Air source device

The air source device is the power core of the Unloading and discharging pneumatic conveying system system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

3. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Unloading and discharging pneumatic conveying system system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

4. Air source device

The air source device is the power core of the Unloading and discharging pneumatic conveying system system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

5. control system

The control system is the "brain" of the Unloading and discharging pneumatic conveying system system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

Unloading and discharging pneumatic conveying system

4、Unloading and discharging pneumatic conveying system application

Unloading and discharging pneumatic conveying systems have the following purposes.

1. Long distance transportation

The Unloading and discharging pneumatic conveying system system can realize long-distance material transportation and meet the demand of long-distance material transfer. This is especially important for some large factories or cross-regional material transportation.

2. save energy and cut emissions

Although the Unloading and discharging pneumatic conveying system system itself needs to consume some energy, compared with other transportation modes, it usually has higher transportation efficiency and lower maintenance cost. In addition, by optimizing the system design and adopting advanced energy-saving technology, energy consumption can be further reduced and the goal of energy saving and emission reduction can be achieved.

3. Reduce pollution

The Unloading and discharging pneumatic conveying system system carries out material transportation in a fully enclosed state, which effectively reduces the environmental pollution caused by dust flying and material leakage.

4. Long-distance and multipoint transportation

The Unloading and discharging pneumatic conveying system system can realize long-distance material transportation and meet the demand of long-distance material transfer. At the same time, it can also realize multi-point transportation, that is, materials are collected from multiple locations and transported to a centralized point, or materials are dispersed from a centralized point to multiple locations. This flexibility makes Unloading and discharging pneumatic conveying systems have important application value in large factories and cross-regional material transportation.

5. Bulk material transportation

The Unloading and discharging pneumatic conveying system is especially suitable for conveying powdery, granular and flowable bulk materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, pharmaceutical powder, etc. Through the Unloading and discharging pneumatic conveying system, these materials can be efficiently transferred between different production links or equipment.

Unloading and discharging pneumatic conveying system

5、On-site real shot of Unloading and discharging pneumatic conveying system

Details of hyde Unloading and discharging pneumatic conveying system,the product looks atmospheric.。

Unloading and discharging pneumatic conveying system

Note: All the pictures in this article were taken by hyde powder manufacturer.。

6、Unloading and discharging pneumatic conveying system price advantage

The Unloading and discharging pneumatic conveying system price is introduced as follows:

1. regional difference

Geographical location also has a certain influence on the formulation of price, because there is a close relationship between geographical location and transportation cost. Generally, the price of places with superior geographical location will be more fair, which is lower than that of those remote cities. hyde the site is located at:shandong(Province), where the traffic is very developed and convenient, provides a series of conveniences for the distribution of products to a great extent.

2. Reasonable sales model

What kind of sales methods manufacturers have has an intuitive impact on product prices. If it is a direct selling manufacturer, the manufacturer sells directly to customers, and there is no intermediate price difference, which can benefit customers to a greater extent.

3. market competition

If there is a large demand for Unloading and discharging pneumatic conveying system in the market, the price of products will naturally be high. On the other hand, if the supply of this equipment exceeds demand, then manufacturers will have inventory accumulation. In order to dispose of these products as soon as possible, some manufacturers will sell them by lowering the price of products, so the price will be very low.

4. mass discrepancy

The quality of the product determines the production process and results. Good quality means that the raw materials of the product are better and the price will definitely be higher.

5. Brand strength

At present, there are various brands of Unloading and discharging pneumatic conveying system in jinan. The performance, quality and after-sales of products under different brands are different, and the prices of Unloading and discharging pneumatic conveying system are different.

Unloading and discharging pneumatic conveying system

Unloading and discharging pneumatic conveying systemmultifunctional, with functions such as material handling, Environmental protection and pollution-free, Explosion-proof involves, Physical processing assistance and Closed conveying，Simple structure and reliable operation.，it mainly includes Bunker system, Conveying pipeline system, dust pelletizing system, dust pelletizing system and Air source system，is a comprehensive technology, which involves fluid mechanics, material science, automation technology, manufacturing technology and other fields.。