What is a 304 stainless steel pneumatic conveying system? Introduction to the Working Principle of Powder pneumatic conveying

304 stainless steel pneumatic conveying systemis a kind of material conveying equipment which combines jet technology and fluidization technology.，the product looks atmospheric.，the advantage is Large conveying capacity, long conveying distance and high conveying quality.、In the conveying process, various technological operations can be carried out at the same time.、Materials are transported by closed pipelines.，It can reduce the pollution to the surrounding environment in the process of transportation, improve the production environment, facilitate safe production, and completely seal and transport without pollution.、The materials are completely sealed during transportation.，The material is not affected by the outside world and will not be wet or deteriorated. Not easy to leak, causing dust flying, fully sealed and pollution-free transportation.、PLC intelligent control, high degree of automation and simple operation.，meet the needs of material transportation，the advantage is In the process of conveying, various technological operations can be carried out at the same time, such as mix.、Not only can materials be transported from multiple feed points to the discharge point in turn, but also materials can be transported from multiple feed points to the discharge point at the same time.、Materials are transported in a closed pipeline.，Less dust flying and spilling, good environmental sanitation conditions, complete sealing and pollution-free transportation.、Can be charged at one place, and then discharged at multiple places, and realize remote operation.、In the process of conveying, various technological operations can be carried out at the same time, such as dry.，in the course of work,Compressed air or other gases are passed through the air supply device to generate airflow, forming a certain airflow speed and pressure. Subsequently, the material is sent into the conveying pipeline through the feeding device, and under the action of the airflow, the material particles are suspended in the airflow or flow along the pipeline in groups. This gas-solid two-phase flow state enables materials to be transported to the target position along the pipeline.。

1、Brief introduction of 304 stainless steel pneumatic conveying system

304 stainless steel pneumatic conveying systemis a technical integrated material conveying system that uses air (or gas) flow as conveying power to convey bulk solid materials in pipelines.，multifunctional, with functions such as Explosion-proof involves, Physical processing assistance, Explosion-proof involves, material handling and Environmental protection and pollution-free，it is widely used inmedicine,pharmaceutical factory,transportation,heat-engine plant,power and other industries，customizable。

304 stainless steel pneumatic conveying system

2、304 stainless steel pneumatic conveying system application

304 stainless steel pneumatic conveying systems have the following purposes.

1. cut down on energy consumption

Although the power consumption of the 304 stainless steel pneumatic conveying system is relatively large, the energy consumption can be reduced by optimizing the system design and selecting efficient equipment, so as to achieve the goal of energy saving and consumption reduction.

2. Long-distance and multipoint transportation

The 304 stainless steel pneumatic conveying system system can realize long-distance material transportation and meet the demand of long-distance material transfer. At the same time, it can also realize multi-point transportation, that is, materials are collected from multiple locations and transported to a centralized point, or materials are dispersed from a centralized point to multiple locations. This flexibility makes 304 stainless steel pneumatic conveying systems have important application value in large factories and cross-regional material transportation.

3. Bulk material transportation

The 304 stainless steel pneumatic conveying system is especially suitable for conveying powdery, granular and flowable bulk materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, pharmaceutical powder, etc. Through the 304 stainless steel pneumatic conveying system, these materials can be efficiently transferred between different production links or equipment.

4. Environmental protection and cleaner production

The 304 stainless steel pneumatic conveying system process is carried out in a closed pipeline, which effectively prevents dust from flying and leaking, thus reducing environmental pollution and harm to employees' health. This is especially important for industries that need to maintain high cleanliness or dust-free environment.

5. Long distance transportation

The 304 stainless steel pneumatic conveying system system can realize long-distance material transportation and meet the demand of long-distance material transfer. This is especially important for some large factories or cross-regional material transportation.

304 stainless steel pneumatic conveying system

3、Introduction of advantages of 304 stainless steel pneumatic conveying system

304 stainless steel pneumatic conveying systems have the following advantages.

1. Multi-point to multi-point transportation

The 304 stainless steel pneumatic conveying system system can realize multi-point to multi-point transportation, meet the needs of different production lines and improve the production flexibility.

2. structure

The structure is relatively simple, mainly composed of conveying pipeline, air source equipment, control system, etc., and the maintenance is convenient.

3. Generality

304 stainless steel pneumatic conveying systems are suitable for conveying powdery, granular or flowable materials, and are suitable for many industries, such as chemical industry, building materials and food. And the 304 stainless steel pneumatic conveying system system can keep stable and continuous flow in long-distance transportation, thus meeting the production needs.

4. Material quality protection

In the process of conveying, the 304 stainless steel pneumatic conveying system can prevent the materials from getting wet, soiled or mixed with other impurities, thus ensuring the quality of the conveyed materials.

5. Small floor space

Compared with the traditional mechanical transportation mode, the equipment and pipelines required by the 304 stainless steel pneumatic conveying system occupy a smaller area, which can make full use of the space and reduce the construction cost and floor space of the factory building.

304 stainless steel pneumatic conveying system

4、Structural advantages of 304 stainless steel pneumatic conveying system

The 304 stainless steel pneumatic conveying system has the following structure

1. dust pelletizing system

Dust removal system is very important for the environmental protection performance of 304 stainless steel pneumatic conveying system system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

2. control system

The control system is the "brain" of the 304 stainless steel pneumatic conveying system system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

3. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

4. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

5. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

304 stainless steel pneumatic conveying system

5、304 stainless steel pneumatic conveying system introduction video

On-site aerial photography of 304 stainless steel pneumatic conveying system。

304 stainless steel pneumatic conveying system

As you can see from the live video.，Shandong Haide Fenti Engineering Co., Ltd. features include The conveying speed is faster, Large conveying capacity, Flexible conveying distance, omniseal and High reliability。

6、Structural characteristics of 304 stainless steel pneumatic conveying system

The 304 stainless steel pneumatic conveying system has the following structure

1. control system

The control system is the "brain" of the 304 stainless steel pneumatic conveying system system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

2. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

3. dust pelletizing system

Dust removal system is very important for the environmental protection performance of 304 stainless steel pneumatic conveying system system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

4. Air source device

The air source device is the power core of the 304 stainless steel pneumatic conveying system system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

5. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

304 stainless steel pneumatic conveying system

304 stainless steel pneumatic conveying systemit has the functions of Closed conveying, Automatic control, Physical processing assistance, Physical processing assistance and Automatic control，the principle is simple.Mainly using the dynamic pressure and static pressure of air, the material particles are suspended in the airflow or transported in groups along the pipeline.。