Introduction to Multi functional feeding and conveying system, pneumatic conveying specifications, model parameters

Multi functional feeding and conveying systemthat is, the technology of conveying granular materials in closed pipes by air flow.。

1、Brief introduction of Multi functional feeding and conveying system

Multi functional feeding and conveying systemis a method of conveying materials through pipelines by using air flow with a certain speed.，Easy maintenance,Operation safety,Efficient and flexible,energy saving and environmental protection,Reliable operation，the advantage is The conveying system is closed.，Effectively prevent materials from absorbing moisture, fouling or mixing with other impurities during transportation, and fully seal and transport without pollution.、The conveying system is closed, which can prevent the materials from being affected with damp, soiled and mixed with other sundries in the conveying process, and ensure the conveying quality of the materials.、The material is completely closed in the whole conveying process.，Less affected by climatic and environmental conditions, fully sealed and pollution-free transportation.、In the process of conveying, various technological operations can be carried out at the same time, such as cool.、Not only can materials be transported from multiple feed points to the discharge point in turn, but also materials can be transported from multiple feed points to the discharge point at the same time, and remote operation can be realized.，support customization。

Multi functional feeding and conveying system

2、Structural advantages of Multi functional feeding and conveying system

The Multi functional feeding and conveying system has the following structure

1. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

2. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

3. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Multi functional feeding and conveying system system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

4. Air source device

The air source device is the power core of the Multi functional feeding and conveying system system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

5. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

Multi functional feeding and conveying system

3、Multi functional feeding and conveying system application

Multi functional feeding and conveying systems have the following purposes.

1. Adapt to complex environment

The Multi functional feeding and conveying system system can adapt to various complex environments and layout requirements. Whether in high temperature, high humidity, corrosive or flammable and explosive environment, the normal operation of the system can be ensured by selecting suitable materials and taking corresponding safety measures. In addition, the Multi functional feeding and conveying system pipes can be flexibly arranged according to the actual situation of the production site, which makes the configuration of factory equipment more reasonable.

2. Reduce pollution

The Multi functional feeding and conveying system system carries out material transportation in a fully enclosed state, which effectively reduces the environmental pollution caused by dust flying and material leakage.

3. cut down on energy consumption

Although the power consumption of the Multi functional feeding and conveying system is relatively large, the energy consumption can be reduced by optimizing the system design and selecting efficient equipment, so as to achieve the goal of energy saving and consumption reduction.

4. Multi-point transportation

The Multi functional feeding and conveying system system can be flexibly configured to realize transportation from multiple centralized points to one centralized point, or from one centralized point to multiple centralized points, so as to meet the complex production layout requirements.

5. save energy and cut emissions

Although the Multi functional feeding and conveying system system itself needs to consume some energy, compared with other transportation modes, it usually has higher transportation efficiency and lower maintenance cost. In addition, by optimizing the system design and adopting advanced energy-saving technology, energy consumption can be further reduced and the goal of energy saving and emission reduction can be achieved.

Multi functional feeding and conveying system

4、Introduction of Multi functional feeding and conveying system characteristics

Multi functional feeding and conveying systemfeatures include High conveying efficiency, Flexible layout, Easy to use, Can make full use of space and omniseal，it is widely used in chemical industry, build a ship, metallurgy, building material and pharmaceutical factory，is a kind of high quality and low price Multi functional feeding and conveying system，it is mainly composed of Air source system, Conveying pipeline system, dust pelletizing system, delivery system and Bunker system，This productSimple structure and reliable operation.，the principle is simple.Using aerodynamic force, compressed air or other gases form airflow in the pipeline, and the material particles are suspended in the airflow or transported along the pipeline in groups.。

Multi functional feeding and conveying system

5、Multi functional feeding and conveying system advantage

The advantages of Multi functional feeding and conveying system are as follows:

1. High degree of automation

The Multi functional feeding and conveying system system is easy to realize automatic control, and can be operated and monitored remotely through the central console, which reduces the labor cost and improves the production efficiency and management convenience.

2. energy saving and environmental protection

Compared with the traditional mechanical transportation mode, the Multi functional feeding and conveying system has higher transportation efficiency, which can reduce transportation time and transportation cost. Moreover, the Multi functional feeding and conveying system does not need additional power to drive, which reduces energy consumption.

3. Save space

Multi functional feeding and conveying system equipment usually occupies a small area and can make full use of space. This is especially important for factories or production lines with limited space, which can save valuable production space.

4. Improve conveying efficiency

The Multi functional feeding and conveying system can realize the continuous and efficient transportation of materials, which is not limited by the site and distance, and is especially suitable for long-distance and large-scale material transportation.

5. Multi-point to multi-point transportation

The Multi functional feeding and conveying system system can realize multi-point to multi-point transportation, meet the needs of different production lines and improve the production flexibility.

Multi functional feeding and conveying system

6、Multi functional feeding and conveying system price advantage

The Multi functional feeding and conveying system price is introduced as follows:

1. market factors

This factor is directly related to the economic dynamics. When the economic dynamics are unstable, the relationship between supply and demand will be unbalanced, which will lead to a very large fluctuation in the price of Multi functional feeding and conveying system. Therefore, we should also be aware of the relationship between this factor and the price during the price setting process.

2. product costs

The production cost determines the price. The production cost here mainly includes technology, materials, technology, manpower and other related factors, among which the technology content is high, and the cost is relatively high, but the performance will be better; The better the quality of raw materials, the greater the cost and the longer the overall life of the product; If the manufacturer has a rational manufacturing process and strict production management system, and can make full use of human and material resources, then it can reduce the waste of expenses and production costs to a great extent, and the Multi functional feeding and conveying system just meets this condition, so as to ensure the high-tech content and high quality of products, it can also enjoy low prices.

3. Service factor

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, hyde powder Multi functional feeding and conveying system manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the Multi functional feeding and conveying system price can meet the purchasing needs of customers.

4. Quality advantages and disadvantages

Quality generally refers to the quality of the product. The better the quality, the higher the quality of the product. Because the quality is directly proportional to the cost of the product, the price of the Multi functional feeding and conveying system will vary greatly. hyde attaches great importance to the quality of products, and the formulation of prices is also reasonable.

5. technology content

The more advanced the technology, the higher the price will be, otherwise the product price will be low, and customers must pay attention to whether their own technology meets the production requirements when purchasing products.

Multi functional feeding and conveying system

Multi functional feeding and conveying systemusually used in plastic, power, grain processing, building materials, heat-engine plant and other fields，It refers to a mode of transportation in which granular materials are continuously transported according to the specified route with the help of air energy (kinetic energy or static pressure energy) in the pipeline.。