What is a Micro powder pneumatic conveying? Introduction to the Working Principle of Powder pneumatic conveying

Micro powder pneumatic conveyingis a kind of material conveying equipment which uses air flow energy to convey granular materials in a closed pipeline.。

1、Brief introduction of Micro powder pneumatic conveying

Micro powder pneumatic conveyingis a material conveying system that uses the pressure of gas to convey powder materials.，the advantage is High conveying speed, good conveying quality and high conveying efficiency.、It is easy to realize the transportation engineering goal of multi-point feeding and multi-point unloading.、In the conveying process, various technological operations can be carried out at the same time.、Multi-point feeding and multi-point discharging are possible.、The conveying system is closed.，Reduce the diffusion of its dust in the air, fully sealed and pollution-free transportation.，is a popular Micro powder pneumatic conveying。

Micro powder pneumatic conveying

2、Micro powder pneumatic conveying use

The purpose of Micro powder pneumatic conveying is introduced as follows:

1. save energy and cut emissions

Although the Micro powder pneumatic conveying system itself needs to consume some energy, compared with other transportation modes, it usually has higher transportation efficiency and lower maintenance cost. In addition, by optimizing the system design and adopting advanced energy-saving technology, energy consumption can be further reduced and the goal of energy saving and emission reduction can be achieved.

2. Adapt to complex environment

The Micro powder pneumatic conveying system can adapt to various complex environments and layout requirements. Whether in high temperature, high humidity, corrosive or flammable and explosive environment, the normal operation of the system can be ensured by selecting suitable materials and taking corresponding safety measures. In addition, the Micro powder pneumatic conveying pipes can be flexibly arranged according to the actual situation of the production site, which makes the configuration of factory equipment more reasonable.

3. cut down on energy consumption

Although the power consumption of the Micro powder pneumatic conveying is relatively large, the energy consumption can be reduced by optimizing the system design and selecting efficient equipment, so as to achieve the goal of energy saving and consumption reduction.

4. material handling

Micro powder pneumatic conveying system is widely used in conveying all kinds of powdery, granular and small block materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, ore, pulverized coal, pharmaceutical powder, etc. Through the pipeline system, these materials can be efficiently and continuously transported from one place to another, greatly reducing the complexity and cost of manual handling and mechanical transportation.

5. Process assistance

In some production processes, Micro powder pneumatic conveyings are not only used for conveying materials, but also as part of the process. For example, in the chemical and pharmaceutical industries, the Micro powder pneumatic conveying system can cooperate with other equipment to realize process operations such as mixing, grading, drying and cooling of materials, and improve production efficiency and product quality.

Micro powder pneumatic conveying

3、Introduction of Micro powder pneumatic conveying characteristics

Micro powder pneumatic conveyingit has the characteristics of The failure rate is low, Operation safety, easy installation, Save manpower and convenient to use，Compressed air or other gases are passed through the air supply device to generate airflow, forming a certain airflow speed and pressure. Subsequently, the material is sent into the conveying pipeline through the feeding device, and under the action of the airflow, the material particles are suspended in the airflow or flow along the pipeline in groups. This gas-solid two-phase flow state enables materials to be transported to the target position along the pipeline. In the process of transportation, gas-solid separator (such as dust collector) is used to separate materials from air to ensure the quality of transported materials.，High conveying speed, good conveying quality and high conveying efficiency.，meet the needs of material transportation、In the process of conveying, various technological operations can be carried out at the same time, such as mix.、Intermittent or continuous conveying, multi-point feeding and multi-point discharging, convenient and flexible, wide selection range, and long-distance operation.、The pipeline layout is flexible, and it can be arranged according to the specific terrain.、In the process of conveying, various technological operations can be carried out at the same time, such as dust.，is a Micro powder pneumatic conveying newly developed by hyde powder。

Micro powder pneumatic conveying

4、Micro powder pneumatic conveying field real shot

The following is the live video of Micro powder pneumatic conveying designed and produced by hyde for users, from which we can see the the advantage is Can realize the transportation of materials in a closed pipeline.，No dust leakage, environmental protection and pollution-free, fully sealed and pollution-free transportation.、In the process of transportation, various technological operations can be carried out at the same time, such as physical and chemical processes such as smash.、Fully enclosed transportation system, materials are transported in closed pipes.，Not affected by environment, climate and other conditions, fully sealed and pollution-free transportation.、It is easy to realize the transportation engineering goal of multi-point feeding and multi-point discharging, and realize long-distance operation.、The operation mode is flexible and changeable, and it can run continuously or regularly.，meet the needs of material transportation of hyde powderproduce的Micro powder pneumatic conveying.。

Micro powder pneumatic conveying

As you can see from the live video.，hyde it can be used in pharmaceutical factory, chemical industry, build a ship, plastic, grain processing and other industries。

5、Structural advantages of Micro powder pneumatic conveying

The Micro powder pneumatic conveying structure is introduced as follows:

1. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

2. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

3. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Micro powder pneumatic conveying system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

4. control system

The control system is the "brain" of the Micro powder pneumatic conveying system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

5. Air source device

The air source device is the power core of the Micro powder pneumatic conveying system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

Micro powder pneumatic conveying

6、Micro powder pneumatic conveying price

The Micro powder pneumatic conveying price is introduced as follows:

1. market demand

Market supply and demand is the main objective factor to determine the price, and the imbalance between supply and demand affects the price change. Generally speaking, when the Micro powder pneumatic conveying market is in short supply, its price will increase relatively; On the contrary, when the supply exceeds the demand, it also indicates that the competition among manufacturers is fierce. In order to better improve the visibility of manufacturers and occupy a more favorable market position, manufacturers will generally lower their prices appropriately; Only when the market supply and demand reach a balanced state can its normal price be realized.

2. regional advantages

The consumption level in different regions is different, which directly affects the equipment cost investment. Generally speaking, the higher the consumption level, the higher the cost of production equipment, and the higher the cost investment, the higher the price naturally.

3. Brand strength

At present, there are various brands of Micro powder pneumatic conveying in jinan, Shandong province. The performance, quality and after-sales of products under different brands are different, and the prices of Micro powder pneumatic conveying are different.

4. Parameter size

There are many product specifications and models in the market. The efficiency and power of different specifications and models are different, and the price is naturally different. Customers need to choose the appropriate specifications and models according to their own needs.

5. market supply and demand

When there are many customers who need this product in the market, and the supply quantity of the manufacturer is limited, there is not so much inventory at all. At this time, the demand will be in short supply, and the price of the Micro powder pneumatic conveying will be very high.

Micro powder pneumatic conveying

Micro powder pneumatic conveyingIt uses the energy of airflow to transport powder materials along the airflow direction in a closed pipeline.，It is a product series that integrates Multi-point transportation, Long-distance and multipoint transportation, Heating, cooling and drying, Reduce pollution and cut down on energy consumption。