What is a Central centralized feeding? How much is the price of the pneumatic conveying system?

Central centralized feedingis a concrete application of fluidization technology to transport granular materials along the direction of airflow in a closed pipeline by using the energy of airflow.，it has the characteristics of Good dustproof effect, Various processes, System modularization, Easy to realize automation and Easy to use，Not only can materials be transported from multiple feed points to the discharge point in turn, but also materials can be transported from multiple feed points to the discharge point at the same time, and remote operation can be realized.、In the process of transportation, various technological operations can be carried out at the same time, such as physical and chemical processes such as mix.、The material is completely closed in the whole conveying process.，Not affected by environment, climate and other conditions, fully sealed and pollution-free transportation.、In the conveying process, various technological operations can be carried out at the same time.、Intermittent or continuous conveying, multi-point feeding and multi-point discharging, convenient and flexible, and wide selection range.。

1、Brief introduction of Central centralized feeding

Central centralized feedingis a technology that uses compressed air or aerodynamic force to transport materials from one point to another.。

Central centralized feeding

2、Central centralized feeding function

Central centralized feedingit has the functions of Automatic control, Physical processing assistance, Closed conveying, Closed conveying and Automatic control，at the start of the operation,It mainly uses the energy of airflow to transport granular materials along the airflow direction in a closed pipeline.，super quality and competitive price。

Central centralized feeding

3、Central centralized feeding performance advantage

The advantages of Central centralized feeding are as follows:

1. energy saving and environmental protection

In the process of Central centralized feeding opening, dust pollution and noise pollution will hardly occur, which is more environmentally friendly than traditional mechanical transportation.

2. be of simple construction

The structure is relatively simple and the operation is very convenient. It can be transported flexibly in horizontal, vertical or inclined directions to adapt to different production environments.

3. Multi-point to multi-point transportation

The Central centralized feeding system can realize multi-point to multi-point transportation, meet the needs of different production lines and improve the production flexibility.

4. Strong adaptability

For materials with unstable chemical properties, the Central centralized feeding system can use inert gas for transportation to ensure the stability of the materials during transportation.

5. Strong flexibility

The pipeline layout of the Central centralized feeding is flexible and can be flexibly configured according to the actual layout and process requirements of the factory. This flexibility enables the Central centralized feeding system to adapt to various complex production environments and meet different production needs.

Central centralized feeding

4、Central centralized feeding application

Central centralized feedings have the following purposes.

1. Dust removal and purification

The Central centralized feeding system is usually equipped with a dust collector to collect and treat the dust generated in the transportation process to keep the production environment clean and hygienic.

2. Long distance transportation

The Central centralized feeding system can realize long-distance material transportation and meet the demand of long-distance material transfer. This is especially important for some large factories or cross-regional material transportation.

3. Multi-point transportation

The Central centralized feeding system can be flexibly configured to realize transportation from multiple centralized points to one centralized point, or from one centralized point to multiple centralized points, so as to meet the complex production layout requirements.

4. Mixing and classification

In the process of conveying, the Central centralized feeding system can cooperate with other equipment to realize the mixing and grading operation of materials, and improve the production efficiency and product quality.

5. Heating, cooling and drying

Heating, cooling or drying equipment can be installed in the Central centralized feeding pipeline to carry out necessary treatment of materials to meet the specific requirements in the production process.

Central centralized feeding

5、Structural characteristics of Central centralized feeding

The Central centralized feeding structure is introduced as follows:

1. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

2. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

3. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Central centralized feeding system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

4. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

5. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

Central centralized feeding

6、Central centralized feeding field real shot

Central centralized feeding high-definition picture display, all-round shooting without dead ends, for our customers to visit.。

Central centralized feeding

Note: All the pictures in this article were taken by hyde manufacturer.。

Central centralized feedingis a kind of material conveying system which uses airflow as power to convey materials through pipeline system.，at runtime,Compressed air or other gases are passed through the air supply device to generate airflow, forming a certain airflow speed and pressure. Subsequently, the material is sent into the conveying pipeline through the feeding device, and under the action of the airflow, the material particles are suspended in the airflow or flow along the pipeline in groups. This gas-solid two-phase flow state enables materials to be transported to the target position along the pipeline. In the process of transportation, gas-solid separator (such as dust collector) is used to separate materials from air to ensure the quality of transported materials.。