Introduction to Centralized feeding and pneumatic conveying advantages and features

Centralized feedingis to transport granular materials along the direction of airflow in a closed pipeline by using the energy of airflow.，the advantage is It can be sent from several points to one place in a centralized way, or from one place to several points in a decentralized way for long-distance operation.、The operation mode is flexible and changeable, and it can run continuously or regularly.，meet the needs of material transportation、In the conveying process, various technological operations can be carried out at the same time.、Fully enclosed transportation system, materials are transported in closed pipes.，Less dust flying, meeting the requirements of environmental protection, fully sealed and pollution-free transportation.、The materials concentrated from several points can be sent to one place or sent to scattered points from one place.，multifunctional, with functions such as Automatic control, Automatic control, Environmental protection and pollution-free, material handling and Closed conveying，is a Centralized feeding newly developed by hyde powder。

1、Brief introduction of Centralized feeding

Centralized feedingis a material conveying system that uses the pressure of gas to convey powder materials.，usually used in heat-engine plant, logistics, cast, building materials, plastic and other fields。

Centralized feeding

2、Centralized feeding work site real shot

Various styles and styles of Centralized feeding, complete models, for you to choose at will.。

Centralized feeding

Note: All the pictures in this article were taken by hyde manufacturer.。

3、Introduction of Centralized feeding characteristics

Centralized feedingEasy maintenance,Easy to automate management,automation,Safe and reliable,Stable operation，The conveying system is closed, which can prevent the materials from being affected with damp, soiled and mixed with other sundries in the conveying process, and ensure the conveying quality of the materials.、In the process of conveying, various technological operations can be carried out at the same time, such as smash.、It can send materials concentrated from several points to one place or from one place to scattered points, and realize long-distance operation.、Closed pipeline transportation，Reduce the diffusion of its dust in the air, fully sealed and pollution-free transportation.、The conveying system is closed, which can prevent the materials from being affected with damp, soiled and mixed with other sundries in the conveying process, and ensure the conveying quality of the materials.，meet the needs of material transportation。

Centralized feeding

4、Functional advantages of Centralized feeding

Centralized feedings have the following advantages.

1. High degree of automation

The Centralized feeding system can realize automatic control and remote monitoring, which improves the automation level and production efficiency of the production process.

2. Small floor space

Compared with the traditional mechanical transportation mode, the equipment and pipelines required by the Centralized feeding occupy a smaller area, which can make full use of the space and reduce the construction cost and floor space of the factory building.

3. High conveying efficiency and low cost.

The Centralized feeding can convey materials continuously and stably, and the conveying speed is faster, which improves the production efficiency and conveying capacity.

4. Flexible configuration of conveying pipeline and optimization of process flow.

The conveying pipeline can be flexibly configured according to the actual layout of the factory, which makes the process configuration of the factory equipment more reasonable, optimizes the production process and improves the labor productivity.

5. Convenient maintenance and easy automation.

The Centralized feeding system has relatively few moving parts, which makes the maintenance more convenient. At the same time, due to its structural characteristics, the system is easy to realize automatic control, which improves production efficiency and management convenience.

Centralized feeding

5、Structural advantages of Centralized feeding

The Centralized feeding has the following structure

1. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Centralized feeding system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

2. Feeding device

The feeding device is responsible for feeding materials evenly and stably into the conveying pipeline. It is usually installed at the beginning of the system, and uses the negative pressure or positive pressure formed by the air source device to mix materials with air in a certain proportion and send them into the pipeline. Common feeding devices include rotary valves, screw conveyors, rotary feeders, screw pumps, silo pumps and Venturi nozzles. The selection of feeding device should be considered comprehensively according to the characteristics of materials and transportation requirements.

3. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

4. Air source device

The air source device is the power core of the Centralized feeding system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

5. control system

The control system is the "brain" of the Centralized feeding system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

Centralized feeding

6、Centralized feeding price concessions

The Centralized feeding price is introduced as follows:

1. Brand strength

At present, there are various brands of Centralized feeding in shandong(Province). The performance, quality and after-sales of products under different brands are different, and the prices of Centralized feeding are different.

2. Manufacturer scale

The products manufactured by manufacturers of different scales are also different. Large-scale manufacturers have advanced production technology, the quality of products manufactured is reliable, and large-scale manufacturers have perfect after-sales service, which can provide greater protection for customers and the products manufactured are more cost-effective. Therefore, customers should try to choose large manufacturers to purchase.

3. raw material

The higher the cost of materials, the higher the price will be. In the process of purchasing, customers need to make a detailed understanding of the materials selected for manufacturing products.

4. product configuration

If the comprehensive configuration of the product is higher, the selling price of the product will be higher, otherwise the price will be lower, so there is a close relationship between the configuration level and the price.

5. Cost input

A Centralized feeding needs to spend a lot of manufacturing costs from research and development to production to sales, including raw material costs, technical costs, labor costs, etc. The higher the manufacturing cost, the higher the price will be.

Centralized feeding

Centralized feedingis a popular Centralized feeding，the main structure includes Air source system, Bunker system, control system, Air source system, delivery system and so on，it has been widely used in chemical industry, environmental protection, chemical plant, metallurgy, build a ship and other industries。