Introduction to Pneumatic dust removal equipment, advantages, characteristics and principles of Pneumatic conveying equipment

Pneumatic dust removal equipmentis a kind of material conveying equipment that uses airflow as power to convey materials through pipeline system.，is developed and improved by hyde powder。

1、Brief introduction of Pneumatic dust removal equipment

Pneumatic dust removal equipmentis a technology that uses the energy of airflow to transport granular materials along the direction of airflow in a closed pipeline.，it is widely used inbuilding material,chemical plant,pharmaceutical factory,environmental protection,building materials and other industries。

Pneumatic dust removal equipment

2、Pneumatic dust removal equipment application

Pneumatic dust removal equipments have the following purposes.

1. Long-distance and multipoint transportation

The Pneumatic dust removal equipment system can realize long-distance material transportation and meet the demand of long-distance material transfer. At the same time, it can also realize multi-point transportation, that is, materials are collected from multiple locations and transported to a centralized point, or materials are dispersed from a centralized point to multiple locations. This flexibility makes Pneumatic dust removal equipments have important application value in large factories and cross-regional material transportation.

2. Long distance transportation

The Pneumatic dust removal equipment system can realize long-distance material transportation and meet the demand of long-distance material transfer. This is especially important for some large factories or cross-regional material transportation.

3. save energy and cut emissions

Although the Pneumatic dust removal equipment system itself needs to consume some energy, compared with other transportation modes, it usually has higher transportation efficiency and lower maintenance cost. In addition, by optimizing the system design and adopting advanced energy-saving technology, energy consumption can be further reduced and the goal of energy saving and emission reduction can be achieved.

4. cut down on energy consumption

Although the power consumption of the Pneumatic dust removal equipment is relatively large, the energy consumption can be reduced by optimizing the system design and selecting efficient equipment, so as to achieve the goal of energy saving and consumption reduction.

5. Process assistance

In some production processes, Pneumatic dust removal equipments are not only used for conveying materials, but also as part of the process. For example, in the chemical and pharmaceutical industries, the Pneumatic dust removal equipment system can cooperate with other equipment to realize process operations such as mixing, grading, drying and cooling of materials, and improve production efficiency and product quality.

Pneumatic dust removal equipment

3、Introduction of Pneumatic dust removal equipment characteristics

Pneumatic dust removal equipmentEasy to realize automation,Large conveying capacity,energy saving and environmental protection,High reliability,Flexible conveying distance，the product looks atmospheric.，The overall structural design is simple and novel.，it has the structure of delivery system, Bunker system, Conveying pipeline system, delivery system and dust pelletizing system，it has the functions of Automatic control, Closed conveying, Physical processing assistance, Environmental protection and pollution-free and Automatic control，is a popular Pneumatic dust removal equipment。

Pneumatic dust removal equipment

4、Pneumatic dust removal equipment advantage

Pneumatic dust removal equipments have the following advantages.

1. Various process operations can be realized.

While conveying materials, the Pneumatic dust removal equipment system can also complete a variety of production processes, such as mixing, crushing, grading, drying, cooling and so on. This versatility makes the Pneumatic dust removal equipment more flexible and adaptable in the production process.

2. Flexible layout

The Pneumatic dust removal equipment is carried out in a closed pipeline, which effectively reduces the flying and escape of dust, improves the working environment, reduces environmental pollution, and also protects materials from external pollution.

3. be simple in structure

The structure is relatively simple and the operation is very convenient. It can be transported flexibly in horizontal, vertical or inclined directions to adapt to different production environments.

4. Convenient maintenance and easy automation.

The Pneumatic dust removal equipment system does not need a lot of mechanical equipment, so its maintenance cost is relatively small. In addition, in the process of use, it is only necessary to clean the pipeline regularly and keep it airtight.

5. High degree of automation

Modern Pneumatic dust removal equipment systems are usually equipped with automatic control equipment, such as PLC control system, sensors, actuators, etc., which can realize remote monitoring and automatic adjustment. This highly automated transportation mode reduces labor costs and improves production efficiency and management convenience.

Pneumatic dust removal equipment

5、Working principle of Pneumatic dust removal equipment

Pneumatic dust removal equipmentMainly based on aerodynamic force, compressed air or other gases generate airflow, so that material particles are suspended in the airflow or transported in groups along the pipeline. In pressure transportation, high-pressure gas pushes materials to flow along the pipeline; In vacuum transportation, the material is sucked and transported to the target position through the negative pressure environment in the pipeline.，It has a wide range of uses, including Multi-point transportation, Bulk material transportation, material handling, Reduce pollution and cut down on energy consumption，the main structure includes control system, Air source system, Bunker system, Conveying pipeline system, Bunker system and so on。

Pneumatic dust removal equipment

6、Pneumatic dust removal equipment price consultation

The Pneumatic dust removal equipment price is introduced as follows:

1. regional advantages

Different provinces and regions have different consumption levels, different market positioning and different prices.

2. raw material

Different manufacturers have different material selection standards. The better the quality of the selected materials, the more expensive the products will be. On the contrary, the prices will be low. However, to avoid customers being deceived, compare several products of the same specification and model before deciding to purchase.

3. Overall configuration

The overall configuration has a great influence on the price. Generally speaking, the higher the configuration, the higher its cost input and the higher the selling price of the product, which is beyond doubt. hyde has made a comprehensive thinking on the overall configuration of products, and at the same time has strictly controlled the material selection and design of products, so the price of products with the same configuration can easily meet the actual purchasing needs of customers.

4. After-sales service level

Service factors always affect the sales price of products, and high-quality service will make customers have greater satisfaction and recognition. The service factors mainly include pre-sales service, in-sales service and after-sales service. For each stage of service, our company takes the price factor into account and makes a reasonable judgment between service and price, so that the Pneumatic dust removal equipment price and service can meet the actual needs of customers.

5. Self quality

Quality is the fundamental factor that determines the price. The better the quality, the more detailed the manufacturing process, the more careful the materials are, the better the performance is, and the price will naturally be more expensive.

Pneumatic dust removal equipment

Pneumatic dust removal equipmentthe advantage is Materials collected from several points can be sent to one place or one place to scattered points.、PLC intelligent control, high degree of automation and simple operation.、In the process of conveying, various technological operations can be carried out at the same time, such as dry.、Closed pipeline transportation，Can effectively prevent moisture and sundries from polluting materials, fully sealed and pollution-free transportation.、Not only can materials be transported from multiple feed points to the discharge point in turn, but also materials can be transported from multiple feed points to the discharge point at the same time.，is a material conveying system that combines jet technology and fluidization technology.。