Introduction to Pneumatic conveying of rice husks and pneumatic conveying system advantages and features

Pneumatic conveying of rice husksis a kind of material conveying system which uses airflow as power to convey materials through pipeline system.，Widely used in Process assistance, Reduce pollution, Heating, cooling and drying, Dust removal and essence and Mixing and classification，the advantage is Closed pipeline transportation，The material is not affected by the outside world and will not be wet or deteriorated. Not easy to leak, causing dust flying, fully sealed and pollution-free transportation.、The whole conveying process is sealed.，Can reduce the pollution to the surrounding environment during transportation, and is fully sealed and pollution-free for transportation.、In the process of conveying, various technological operations can be carried out at the same time, such as dry.、Materials collected from several points can be sent to one place or one place to scattered points.、The pipeline layout is flexible, and it can be arranged according to the specific terrain.，meet the needs of material transportation，Cheap and high quality。

1、Brief introduction of Pneumatic conveying of rice husks

Pneumatic conveying of rice husksis a kind of material conveying system which uses the energy of airflow to convey granular or powdery materials along the airflow direction in a closed pipeline.，it has the structure of Bunker system, dust pelletizing system, delivery system, Conveying pipeline system and control system，This Pneumatic conveying of rice husksThe structure is novel, special, advanced, reasonable and scientific.，is a Pneumatic conveying of rice husks newly developed by hyde powder。

Pneumatic conveying of rice husks

2、Functional advantages of Pneumatic conveying of rice husks

Pneumatic conveying of rice huskss have the following advantages.

1. Environmental protection and pollution-free

Because the Pneumatic conveying of rice husks is carried out in a closed pipeline, the loss and pollution of materials during transportation can be effectively reduced. This not only improves the utilization rate of materials, but also reduces the production cost.

2. Low maintenance cost

The Pneumatic conveying of rice husks device has the advantages of simple structure, few moving parts, convenient maintenance and reduced maintenance cost. At the same time, the equipment occupies a small area and can make full use of space.

3. Totally enclosed conveying

The conveying pipeline can be flexibly configured according to the actual layout of the factory, which makes the process configuration of the factory equipment more reasonable, optimizes the production process and improves the labor productivity.

4. versatility

In the process of conveying, the Pneumatic conveying of rice husks system can also perform physical operations such as heating, cooling, drying and airflow classification or some chemical operations at the same time, which increases the versatility of the system.

5. Material quality protection

In the process of conveying, the Pneumatic conveying of rice husks can prevent the materials from getting wet, soiled or mixed with other impurities, thus ensuring the quality of the conveyed materials. This is especially important for some industries that require high material quality.

Pneumatic conveying of rice husks

3、Pneumatic conveying of rice husks application

Pneumatic conveying of rice huskss have the following purposes.

1. Long distance transportation

The Pneumatic conveying of rice husks system can realize long-distance material transportation and meet the demand of long-distance material transfer. This is especially important for some large factories or cross-regional material transportation.

2. Bulk material transportation

The Pneumatic conveying of rice husks is especially suitable for conveying powdery, granular and flowable bulk materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, pharmaceutical powder, etc. Through the Pneumatic conveying of rice husks, these materials can be efficiently transferred between different production links or equipment.

3. cut down on energy consumption

Although the power consumption of the Pneumatic conveying of rice husks is relatively large, the energy consumption can be reduced by optimizing the system design and selecting efficient equipment, so as to achieve the goal of energy saving and consumption reduction.

4. Environmental protection and cleaner production

The Pneumatic conveying of rice husks process is carried out in a closed pipeline, which effectively prevents dust from flying and leaking, thus reducing environmental pollution and harm to employees' health. This is especially important for industries that need to maintain high cleanliness or dust-free environment.

5. material handling

Pneumatic conveying of rice husks system is widely used in conveying all kinds of powdery, granular and small block materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, ore, pulverized coal, pharmaceutical powder, etc. Through the pipeline system, these materials can be efficiently and continuously transported from one place to another, greatly reducing the complexity and cost of manual handling and mechanical transportation.

Pneumatic conveying of rice husks

4、Working principle of Pneumatic conveying of rice husks

Pneumatic conveying of rice husksthe principle is simple.Compressed air or other gases are passed through the air supply device to generate airflow, forming a certain airflow speed and pressure. Subsequently, the material is sent into the conveying pipeline through the feeding device, and under the action of the airflow, the material particles are suspended in the airflow or flow along the pipeline in groups. This gas-solid two-phase flow state enables materials to be transported to the target position along the pipeline. In the process of transportation, gas-solid separator (such as dust collector) is used to separate materials from air to ensure the quality of transported materials.，Materials are transported by closed pipelines.，Less dust flying, meeting the requirements of environmental protection, fully sealed and pollution-free transportation.、The conveying system is closed, which can prevent the materials from being affected with damp, soiled and mixed with other sundries in the conveying process, and ensure the conveying quality of the materials.、In the process of conveying, various technological operations can be carried out at the same time, such as grade.、It can send materials concentrated from several points to one place or from one place to scattered points, and realize long-distance operation.、Can realize the transportation of materials in a closed pipeline.，Less affected by climatic and environmental conditions, fully sealed and pollution-free transportation.。

Pneumatic conveying of rice husks

5、Physical picture of Pneumatic conveying of rice husks

Exquisite design, excellent material selection, reliable quality and high-definition pictures for our customers to visit.。

Pneumatic conveying of rice husks

Note: All the pictures in this article were taken by hyde manufacturer.。

6、Pneumatic conveying of rice husks use

The purpose of Pneumatic conveying of rice husks is introduced as follows:

1. Mixing and classification

In the process of conveying, the Pneumatic conveying of rice husks system can cooperate with other equipment to realize the mixing and grading operation of materials, and improve the production efficiency and product quality.

2. Reduce pollution

The Pneumatic conveying of rice husks system carries out material transportation in a fully enclosed state, which effectively reduces the environmental pollution caused by dust flying and material leakage.

3. Long distance transportation

The Pneumatic conveying of rice husks system can realize long-distance material transportation and meet the demand of long-distance material transfer. This is especially important for some large factories or cross-regional material transportation.

4. Long-distance and multipoint transportation

The Pneumatic conveying of rice husks system can realize long-distance material transportation and meet the demand of long-distance material transfer. At the same time, it can also realize multi-point transportation, that is, materials are collected from multiple locations and transported to a centralized point, or materials are dispersed from a centralized point to multiple locations. This flexibility makes Pneumatic conveying of rice huskss have important application value in large factories and cross-regional material transportation.

5. Bulk material transportation

The Pneumatic conveying of rice husks is especially suitable for conveying powdery, granular and flowable bulk materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, pharmaceutical powder, etc. Through the Pneumatic conveying of rice husks, these materials can be efficiently transferred between different production links or equipment.

Pneumatic conveying of rice husks

Pneumatic conveying of rice husksat runtime,Mainly using the dynamic pressure and static pressure of air, the material particles are suspended in the airflow or transported in groups along the pipeline.，it has been widely used in build a ship, heat-engine plant, building materials, grain processing, chemical plant and other industries，The overall structural design is relatively simple，it is mainly composed of Air source system, dust pelletizing system, Bunker system, delivery system and Conveying pipeline system。