What is a Aluminum alumina pneumatic conveying? Introduction to the principle of Powder conveying structure

Aluminum alumina pneumatic conveyingis a material conveying system that uses the pressure of gas to convey powder materials.，it is an ideal choice for customers to buy Aluminum alumina pneumatic conveying。

1、Brief introduction of Aluminum alumina pneumatic conveying

Aluminum alumina pneumatic conveyingalso known as airflow transportation, is a way to transport granular materials along the airflow direction in a closed pipeline by using the energy of airflow.，at the start of the operation,The material and air flow form a gas-solid two-phase flow to realize continuous and stable material transportation.，widely used inbuilding material,pharmaceutical factory,logistics,power,heat-engine plant and other industries，the product looks atmospheric.，support customization。

Aluminum alumina pneumatic conveying

2、Functional advantages of Aluminum alumina pneumatic conveying

Aluminum alumina pneumatic conveyings have the following advantages.

1. versatility

While conveying materials, the Aluminum alumina pneumatic conveying system can also complete a variety of production processes, such as mixing, crushing, grading, drying, cooling and so on. This versatility makes the Aluminum alumina pneumatic conveying more flexible and adaptable in the production process.

2. energy saving and environmental protection

The whole process of the Aluminum alumina pneumatic conveying system is carried out in a closed state, so the secondary pollution of materials during transportation can be avoided.

3. Save space

Aluminum alumina pneumatic conveying equipment usually occupies a small area and can make full use of space. This is especially important for factories or production lines with limited space, which can save valuable production space.

4. High degree of automation

The Aluminum alumina pneumatic conveying system is easy to realize automatic control.

5. High conveying efficiency and low cost.

The continuity and high efficiency of the Aluminum alumina pneumatic conveying enable the materials to reach the destination quickly and accurately, reduce the waiting time and material accumulation, and thus improve the overall production efficiency.

Aluminum alumina pneumatic conveying

3、Introduction of advantages of Aluminum alumina pneumatic conveying

The advantages of Aluminum alumina pneumatic conveying are as follows:

1. Strong adaptability

The Aluminum alumina pneumatic conveying system can be suitable for all kinds of loose, dry and non-sticky materials, especially for some environmentally sensitive materials such as inflammable, explosive, toxic and harmful, and smelly, and can realize safe and reliable transportation.

2. be simple in structure

The structure is relatively simple, mainly composed of conveying pipeline, air source equipment, control system, etc., and the maintenance is convenient.

3. Easy to maintain

The Aluminum alumina pneumatic conveying device has the advantages of simple structure, few moving parts, convenient maintenance and reduced maintenance cost. At the same time, the equipment occupies a small area and can make full use of space.

4. Flexible layout

The conveying pipeline can be flexibly configured according to the factory layout and process requirements, and can meet the conveying requirements regardless of the horizontal, vertical or inclined direction. In addition, the Aluminum alumina pneumatic conveying system can be seamlessly connected with other production equipment to improve the overall production efficiency.

5. Flexible pipeline configuration

The pipeline layout of the Aluminum alumina pneumatic conveying is flexible, and it can be configured vertically, horizontally or curved to adapt to the complex production environment and space constraints. This flexibility makes the Aluminum alumina pneumatic conveying system have great adaptability in the renovation and expansion of the factory.

Aluminum alumina pneumatic conveying

4、Aluminum alumina pneumatic conveying application

Aluminum alumina pneumatic conveyings have the following purposes.

1. material handling

Aluminum alumina pneumatic conveying system is widely used in conveying all kinds of powdery, granular and small block materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, ore, pulverized coal, pharmaceutical powder, etc. Through the pipeline system, these materials can be efficiently and continuously transported from one place to another, greatly reducing the complexity and cost of manual handling and mechanical transportation.

2. save energy and cut emissions

Although the Aluminum alumina pneumatic conveying system itself needs to consume some energy, compared with other transportation modes, it usually has higher transportation efficiency and lower maintenance cost. In addition, by optimizing the system design and adopting advanced energy-saving technology, energy consumption can be further reduced and the goal of energy saving and emission reduction can be achieved.

3. Reduce pollution

The Aluminum alumina pneumatic conveying system carries out material transportation in a fully enclosed state, which effectively reduces the environmental pollution caused by dust flying and material leakage.

4. cut down on energy consumption

Although the power consumption of the Aluminum alumina pneumatic conveying is relatively large, the energy consumption can be reduced by optimizing the system design and selecting efficient equipment, so as to achieve the goal of energy saving and consumption reduction.

5. Process assistance

In some production processes, Aluminum alumina pneumatic conveyings are not only used for conveying materials, but also as part of the process. For example, in the chemical and pharmaceutical industries, the Aluminum alumina pneumatic conveying system can cooperate with other equipment to realize process operations such as mixing, grading, drying and cooling of materials, and improve production efficiency and product quality.

Aluminum alumina pneumatic conveying

5、Aluminum alumina pneumatic conveying principle

Aluminum alumina pneumatic conveyingthe principle is simple.It mainly uses the energy of airflow to transport granular materials along the airflow direction in a closed pipeline. It generates air flow with a certain pressure and speed by compressing air or other gases, and suspends materials in the air flow or forms a group to transport along the pipeline.，multifunctional, with functions such as Environmental protection and pollution-free, Closed conveying, Explosion-proof involves, Automatic control and Environmental protection and pollution-free，structure mainly includes: Conveying pipeline system, dust pelletizing system, Bunker system, delivery system, control system and so on。

Aluminum alumina pneumatic conveying

6、Structural characteristics of Aluminum alumina pneumatic conveying

The Aluminum alumina pneumatic conveying structure is introduced as follows:

1. control system

The control system is the "brain" of the Aluminum alumina pneumatic conveying system, which is responsible for monitoring and controlling the whole system. Through the control equipment such as programmable controller, the parameters such as airflow speed, feed rate and system pressure can be accurately adjusted and controlled to ensure the stable operation of the system and meet the production requirements.

2. Bunker system

The silo temporarily stores and releases materials. The silo is usually designed as a pyramid or conical structure to facilitate the storage and unloading of materials. The design of silo needs to consider the different problems of materials in the process of storage and unloading and the flow form of materials.

3. dust pelletizing system

Dust removal system is very important for the environmental protection performance of Aluminum alumina pneumatic conveying system. It is responsible for handling the dust and waste gas generated in the transportation process to ensure that the discharge meets the requirements of environmental protection. Dust removal system usually includes dust collector, fan and discharge pipeline. According to different material characteristics and environmental protection requirements, different dust removal equipment and technical schemes can be selected.

4. Conveying pipeline system

The conveying pipeline is a channel for conveying materials after mixing with airflow. It is made of wear-resistant and corrosion-resistant materials to ensure that the materials will not be polluted or damaged during transportation. The diameter, shape and length of the pipeline will be designed according to the characteristics and delivery capacity of the transported materials. In addition, the pipeline system may also include some auxiliary fittings, such as valves, elbows, expansion joints, etc., for regulating air flow and pipeline connection.

5. Air source device

The air source device is the power core of the Aluminum alumina pneumatic conveying system, which provides the airflow power needed for transportation. Common air source equipment includes roots blower, compressor, centrifugal blower and water ring vacuum pump. These devices can generate stable airflow and provide sufficient power for the transportation of materials.

Aluminum alumina pneumatic conveying

Aluminum alumina pneumatic conveyingis a technology that uses the energy of airflow to transport granular materials along the direction of airflow in a closed pipeline.，the product looks beautiful.。