What is a Loess transportation? Introduction to the advantages and characteristics of the Powder pneumatic conveying

Loess transportationis a technical integrated material conveying system that uses air (or gas) flow as conveying power to convey bulk solid materials in pipelines.，it is widely used inmetallurgy,machine building,building materials,cast,chemical plant and other industries，it has the functions of Physical processing assistance, Closed conveying, Automatic control, material handling and Closed conveying，has been favored by more and more customers.。

1、Brief introduction of Loess transportation

Loess transportationmainly uses the airflow generated by the fan to transport materials along the airflow direction in the closed conveying pipeline.，support customization。

Loess transportation

2、Introduction of advantages of Loess transportation

The advantages of Loess transportation are as follows:

1. Low maintenance cost

The Loess transportation system has less wear parts, lower maintenance cost and higher reliability, which reduces the risk of production interruption.

2. energy saving and environmental protection

The Loess transportation system can reduce the scattering and flying of materials, reduce dust pollution and material loss, and also reduce energy consumption and noise pollution during transportation.

3. Material quality protection

In the process of conveying, the Loess transportation can prevent the materials from getting wet, soiled or mixed with other impurities, thus ensuring the quality of the conveyed materials.

4. Convenient maintenance and easy automation.

The Loess transportation system does not need a lot of mechanical equipment, so its maintenance cost is relatively small. In addition, in the process of use, it is only necessary to clean the pipeline regularly and keep it airtight.

5. Multi-point to multi-point transportation

The Loess transportation system can realize multi-point to multi-point transportation, meet the needs of different production lines and improve the production flexibility.

Loess transportation

3、Advantages of Loess transportation principle

Loess transportationthe principle is simple.Compressed air or other gases are passed through the air supply device to generate airflow, forming a certain airflow speed and pressure. Subsequently, the material is sent into the conveying pipeline through the feeding device, and under the action of the airflow, the material particles are suspended in the airflow or flow along the pipeline in groups. This gas-solid two-phase flow state enables materials to be transported to the target position along the pipeline.。

Loess transportation

4、Loess transportation HD picture

The Loess transportation has a beautiful appearance and atmosphere for our customers' reference.。

Loess transportation

Note: All the pictures in this article were taken by hyde manufacturer.。

5、Loess transportation application

Loess transportations have the following purposes.

1. Multi-point transportation

The Loess transportation system can be flexibly configured to realize transportation from multiple centralized points to one centralized point, or from one centralized point to multiple centralized points, so as to meet the complex production layout requirements.

2. Long-distance and multipoint transportation

The Loess transportation system can realize long-distance material transportation and meet the demand of long-distance material transfer. At the same time, it can also realize multi-point transportation, that is, materials are collected from multiple locations and transported to a centralized point, or materials are dispersed from a centralized point to multiple locations. This flexibility makes Loess transportations have important application value in large factories and cross-regional material transportation.

3. Reduce pollution

The Loess transportation system carries out material transportation in a fully enclosed state, which effectively reduces the environmental pollution caused by dust flying and material leakage.

4. material handling

Loess transportation system is widely used in conveying all kinds of powdery, granular and small block materials. These materials include, but are not limited to, cement, fly ash, grain, plastic particles, ore, pulverized coal, pharmaceutical powder, etc. Through the pipeline system, these materials can be efficiently and continuously transported from one place to another, greatly reducing the complexity and cost of manual handling and mechanical transportation.

5. save energy and cut emissions

Although the Loess transportation system itself needs to consume some energy, compared with other transportation modes, it usually has higher transportation efficiency and lower maintenance cost. In addition, by optimizing the system design and adopting advanced energy-saving technology, energy consumption can be further reduced and the goal of energy saving and emission reduction can be achieved.

Loess transportation

6、Loess transportation application

Loess transportations have the following purposes.

1. Environmental protection and cleaner production

The Loess transportation process is carried out in a closed pipeline, which effectively prevents dust from flying and leaking, thus reducing environmental pollution and harm to employees' health. This is especially important for industries that need to maintain high cleanliness or dust-free environment.

2. cut down on energy consumption

Although the power consumption of the Loess transportation is relatively large, the energy consumption can be reduced by optimizing the system design and selecting efficient equipment, so as to achieve the goal of energy saving and consumption reduction.

3. cut down on energy consumption

Although the power consumption of the Loess transportation is relatively large, the energy consumption can be reduced by optimizing the system design and selecting efficient equipment, so as to achieve the goal of energy saving and consumption reduction.

4. Long-distance and multipoint transportation

The Loess transportation system can realize long-distance material transportation and meet the demand of long-distance material transfer. At the same time, it can also realize multi-point transportation, that is, materials are collected from multiple locations and transported to a centralized point, or materials are dispersed from a centralized point to multiple locations. This flexibility makes Loess transportations have important application value in large factories and cross-regional material transportation.

5. Process assistance

In some production processes, Loess transportations are not only used for conveying materials, but also as part of the process. For example, in the chemical and pharmaceutical industries, the Loess transportation system can cooperate with other equipment to realize process operations such as mixing, grading, drying and cooling of materials, and improve production efficiency and product quality.

Loess transportation

Loess transportationis a common Loess transportation，the advantage is In the process of transportation, various technological operations can be carried out at the same time, such as physical and chemical processes such as be broken.、Not only can the materials from multiple feeding points be conveyed to the discharging point in turn, but also the materials from multiple feeding points can be conveyed to the discharging point at the same time.、The conveying system is closed.，Less dust flying and spilling, good environmental sanitation conditions, complete sealing and pollution-free transportation.、Large conveying capacity, long conveying distance and high conveying quality.，meet the needs of material transportation、In the conveying process, various technological operations can be carried out at the same time.。